Cisco 300 Series Cli Manual page 374

24
374
N/A - Not Available, N/S - Not Supported,
W - Warning, E - Error
ss
switchxxxxxx# show fiber-ports optical-transceiver
Port Temp Voltage Current Output
[C] [Volt]
----------- ------ ------- ------- ------- ------- ---
gi1 Copper
gi6 Copper
gi7 28 3.32
gi8 29 3.33
Temp - Internally measured transceiver temperature
Voltage - Internally measured supply voltage
Current - Measured TX bias current
Output Power - Measured TX output power in milliWatts
Input Power - Measured RX received power in milliWatts
LOS - Loss of signal
N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Input
[mA] Power Power
[mWatt] [mWatt]
7.26 3.53 3.68
6.50 3.53 3.71
78-21075-01 Command Line Interface Reference Guide
PHY Diagnostics Commands
LOS
No
No