Policy-Map - Cisco 300 Series Cli Manual

49
Quality of Service (QoS) Commands
Default Configuration
No match criterion is supported.
Command Mode
Class-map Configuration mode.
Example
The following example defines a class map called Class1. Class1 contains an ACL
called enterprise. Only traffic matching all criteria in enterprise belong to the class
map.
switchxxxxxx(config)# class-map class1
switchxxxxxx(config-cmap)# enterprise
match access-group
49.7

policy-map

A policy map contains one or more class maps and an action that is taken if the
packet matches the class map. Policy maps may be bound to ports/port-channels.
Use the policy-map Global Configuration mode command to creates a policy map
and enter the Policy-map Configuration mode. Use the no form of this command to
delete a policy map.
This command is only available when QoS is in advanced mode.
Syntax
policy-map-name
policy-map
policy-map-name
no policy-map
Parameters
policy-map-name—Specifies the policy map name.
Default Configuration
N/A
Command Mode
Global Configuration mode
800 78-21075-01 Command Line Interface Reference Guide