Show Ip Ssh-Client Server - Cisco 300 Series Cli Manual

6
132
Authentication method: password (default)
Username:
password(Encrypted):
6.9

show ip ssh-client server

Use the show ip ssh-client server command in Privilege EXEC Configuration mode
to display the SSH remote server authentication method and the Trusted Remote
SSH Server table.
Syntax
show ip ssh--client server [
Parameters
•
host — DNS name of an SSH server.
•
ip-address— IP Address of an SSH server. The IP address can be an IPv4,
IPv6 or IPv6z address. See IPv6z Address Conventions.
Default Configuration
N/A
Command Mode
Privilege EXEC configuration mode
User Guidelines
If a specific SSH server is specified, only the fingerprint of this SSH server is
displayed. Otherwise, all known servers are displayed.
Examples
Example 1 - In the following example, the SSH remote server authentication
method and all trusted remote SSH servers are displayed:
switchxxxxxx # show ip ssh-client server
SSH Server Authentication is enabled
server address: 11.1.0.1
anonymous (default)
KzGgzpYa7GzCHhaveSJDehGJ6L3Yf9ZBAU5nsxSxwic=
host ip-address
| ]
78-21075-01 Command Line Interface Reference Guide
SSH Client Commands