Telnet - Cisco 300 Series Cli Manual

5
92
Field Description
S Source route failed.
U Port unreachable.
5.3

telnet

The telnet EXEC mode command logs on to a host that supports Telnet.
Syntax
telnet { ip-address | hostname
Parameters
•
ip-address — Specifies the destination host IP address (IPv4 or IPv6).
•
—
hostname Specifies the destination host name. (Length: 1-160 characters.
Maximum label size for each part of the host name: 63.)
•
—
port Specifies the decimal TCP port number or one of the keywords
listed in the Ports table in the User Guidelines.
•
keyword—Specifies the one or more keywords listed in the Keywords
table in the User Guidelines.
Default Configuration
The default port is the Telnet port (23) on the host.
Command Mode
EXEC mode
User Guidelines
Telnet software supports special Telnet commands in the form of Telnet
sequences that map generic terminal control functions to operating
system-specific functions. To enter a Telnet sequence, press the escape
sequence keys (Ctrl-shift-6) followed by a Telnet command character.
} [ port ] [ keyword ...]
78-21075-01 Command Line Interface Reference Guide
System Management Commands