Cisco 300 Series Cli Manual page 622

37
622
802.3 optional TLVs: 802.3-mac-phy, 802.3-lag, 802.3-max-frame-size
802.1 optional TLVs
PVID: Enabled
PPVIDs: 0, 1, 92
VLANs: 1, 92
Protocols: 802.1x
The following table describes the significant fields shown in the display:
Field Description
Timer The time interval between LLDP updates.
Hold multiplier The amount of time (as a multiple of the timer interval)
that the receiving device holds a LLDP packet before
discarding it.
Reinit timer The minimum time interval an LLDP port waits before
re-initializing an LLDP transmission.
Tx delay The delay between successive LLDP frame
transmissions initiated by value/status changes in the
LLDP local systems MIB.
Port The port number.
State The port's LLDP state.
Optional TLVs Optional TLVs that are advertised. Possible values are:
PD - Port description
SN - System name
SD - System description
SC - System capabilities
Address The management address that is advertised.
Notifications Indicates whether LLDP notifications are enabled or
disabled.
PVID Port VLAN ID advertised.
PPVID Protocol Port VLAN ID advertised.
Protocols Protocols advertised.
Link Layer Discovery Protocol (LLDP) Commands
78-21075-01 Command Line Interface Reference Guide