Cdp Source-Interface - Cisco 300 Series Cli Manual

CDP Commands
78-21075-01 Command Line Interface Reference Guide
Example
Turns off mandatory TLV validation:
switchxxxxxx (config) no cdp mandatory-tlvs validation
36.7

cdp source-interface

The cdp source-interface Global Configuration mode command specifies the CDP
source port used for source IP address selection. The no format of this command
deletes the source interface.
Syntax
cdp source-interface
no cdp source-interface
Parameters
interface-id—Source port used for Source IP address selection.
Default Configuration
No CDP source interface is specified.
Command Mode
Global Configuration mode
User Guidelines
Use the cdp source-interface command to specify an interface whose minimal IP
address will be advertised in the TVL instead of the minimal IP address of the
outgoing interface.
Example
switchxxxxxx
(config) cdp source-interface gi1
interface-id
36
581