Cisco 300 Series Cli Manual page 331

802. 1 X Commands
78-21075-01 Command Line Interface Reference Guide
Port Admin
Mode
---- ----------
gi
1 Auto
gi
2 Auto
gi
3 Auto
gi
4 Force-auth
gi
5 Force-auth
* Port is down or not present.
The following table describes the significant fields shown in the display.
Field
Port
Admin mode
Oper mode
Reauth Control
Reauth Period
Username
Quiet period
Tx period
Max req
Supplicant timeout
Oper Reauth
Mode Control
------------ -------
Authorized Ena
Authorized Ena
Unauthorized Ena
Authorized Dis
Unauthorized Dis
Description
The port number.
The port administration (configured) mode.
Possible values: Force-auth, Force-unauth,
Auto.
The port operational (actual) mode. Possible
values: Authorized, Unauthorized or Down.
Reauthentication control.
Reauthentication period.
Username representing the supplicant identity.
This field shows the username if the port
control is auto. If the port is Authorized, it
displays the username of the current user. If the
port is Unauthorized, it displays the last user
authenticated successfully.
Number of seconds that the device remains in
the quiet state following a failed authentication
exchange (for example, the client provided an
invalid password).
Number of seconds that the device waits for a
response to an Extensible Authentication
Protocol (EAP) request/identity frame from the
client before resending the request.
Maximum number of times that the device
sends an EAP request frame (assuming that no
response is received) to the client before
restarting the authentication process.
Number of seconds that the device waits for a
response to an EAP-request frame from the
client before resending the request.
Reauth Username
Period
------ --------
3600 Bob
3600 John
3600 Clark
3600 n/a
3600 n/a
22
331