Configuring A Message-Of-The-Day Login Banner - Cisco Catalyst 9500 Manual

Administering the Device
Command or Action
Device(config)# end
Step 7
show running-config
Example:
Device# show running-config
Step 8 copy running-config startup-config
Example:
Device# copy running-config startup-config

Configuring a Message-of-the-Day Login Banner

You can create a single or multiline message banner that appears on the screen when someone logs in to the
device.
Follow these steps to configure a MOTD login banner:
SUMMARY STEPS
1. enable
2. configure terminal
3. banner motd c message c
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3 banner motd c message c
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Configuring a Message-of-the-Day Login Banner
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Specifies the message of the day.
25