History - Cisco 300 Series Cli Manual

2
42
2.9

history

The history Line Configuration mode command enables saving commands that
have been entered. Use the no form of this command to disable the command.
Syntax
history
no history
Parameters
N/A
Default Configuration
Enabled.
Command Mode
Line Configuration mode
User Guidelines
This command enables saving user-entered commands for a specified line. You
can return to previous lines by using the up or down arrows.
It is effective from the next time that the user logs in via console/telnet/ssh.
The following are related commands:
•
Use the terminal history size
command for the current terminal session.
•
Use the history size
the command history buffer.
Example
The following example enables the command for Telnet
switchxxxxxx(config)#
switchxxxxxx(config-line)#
EXEC mode command to enable or disable this
Line Configuration mode command to set the size of
line telnet
history
78-21075-01 Command Line Interface Reference Guide
User Interface Commands
.