Cisco 300 Series Cli Manual page 529

Voice VLAN Commands
78-21075-01 Command Line Interface Reference Guide
Default Configuration
N/A
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)#
switchxxxxxx(
config)#
30-Apr-2011 02:01:02 %VLAN-I-ReceivedFromVSDP: Voice VLAN updated by VSDP. Voice
VLAN-ID 100, VPT 5, DSCP 46 (Notification that Agreed Voice VLAN is updated)
(Auto Smartport configuration is changed)
30-Apr-2011 02:01:05 %LINK-W-Down:
30-Apr-2011 02:01:05 %LINK-W-Down:
30-Apr-2011 02:01:06 %LINK-I-Up:
30-Apr-2011 02:01:06 %LINK-I-Up:
switchxxxxxx#show voice vlan
Administrate Voice VLAN state is auto-triggered
Operational Voice VLAN state is auto-enabled
Best Local Voice VLAN-ID is 100
Best Local VPT is 5 (default)
Best Local DSCP is 46 (default)
(Following is the new active source)
Agreed Voice VLAN is received from switch b0:c6:9a:c1:da:00
Agreed Voice VLAN priority is
Agreed Voice VLAN-ID is 100
Agreed VPT is 5
Agreed DSCP is 46
Agreed Voice VLAN Last Change is 11-Apr-30 02:01:02
voice vlan refresh
Vlan 50
Vlan 100
Vlan 50
Vlan 100
2 (active CDP device)
33
529