Show Ip Dhcp - Cisco 300 Series Cli Manual

DHCP Server Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
•
address —Specifies the binding address to delete from the DHCP
database.
•
* —Clears all automatic bindings.
Command Mode
Privileged EXEC mode
User Guidelines
Typically, the address supplied denotes the client IP address. If the asterisk (*)
character is specified as the address parameter, DHCP clears all dynamic
bindings.
Use the no ip dhcp pool Global Configuration mode command to delete a manual
binding.
Example
The following example deletes the address binding 10.12.1.99 from a DHCP
server database:
Console#
clear ip dhcp binding

53.20 show ip dhcp

The show ip dhcp EXEC mode command displays the DHCP configuration.
Syntax
show ip dhcp
Command Mode
EXEC mode
Example
The following example displays the DHCP configuration.
show ip dhcp
console#
DHCP server is enabled.
DHCP ping packets is enabled with 2 retries and 500 milliseconds.
10.12.1.99
53
889