Rmon Event - Cisco 300 Series Cli Manual

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

Startup Alarm

Alarm that is sent when this entry is first set. If the

first sample is greater than or equal to the rising

threshold, and startup alarm is equal to rising or

rising-falling, then a single rising alarm is

generated. If the first sample is less than or equal

to the falling threshold, and startup alarm is equal

falling or rising-falling, then a single falling alarm

is generated.

Sampled statistic rising threshold. When the

current sampled value is greater than or equal to

this threshold, and the value at the last sampling

interval is less than this threshold, a single event

is generated.

Sampled statistic falling threshold. When the

current sampled value is less than or equal to this

threshold, and the value at the last sampling

interval is greater than this threshold, a single

event is generated.

Rising Event

Event index used when a rising threshold is

Falling Event

Event index used when a falling threshold is

Entity that configured this entry.

rmon event

Use the rmon event Global Configuration mode command to configure an event.

Use the no form of this command to remove an event.

index {none | log | trap | log-trap} [community text] [description text]

[owner name]

no rmon event

index—Specifies the event index. (Range: 1–65535)

none— Specifies that no notification is generated by the device for this

Remote Network Monitoring (RMON) Commands

78-21075-01 Command Line Interface Reference Guide