Show Snmp - Cisco 300 Series Cli Manual

Network Management Protocol (SNMP) Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example configures the scalar MIB sysName with the value
TechSupp.
switchxxxxxx(config)#

12.21 show snmp

Use the show snmp Privileged EXEC mode command to display the SNMP status.
Syntax
show snmp
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays the SNMP communications status.
switchxxxxxx# show snmp
SNMP is enabled
Community-String Community-Access
---------------- ----------------
public read only
private read write
private su
Community-string Group name
---------------- ----------
public user-group
sysName sysname TechSupp
snmp-server set
View name
------------
user-view
Default
DefaultSuper
IP Address
----------
All
12
IP Address Mask
---------- ----
All
172.16.1.1/10
172.16.1.1
Mask Type
----- ------
Router
221