Ip Igmp Snooping Vlan Multicast-Tv - Cisco 300 Series Cli Manual

38
640
You can register an entry without specifying an interface.
Using the no command without a port-list removes the entry.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 static 239.2.2.2 interface
38.7

ip igmp snooping vlan multicast-tv

Use the ip igmp snooping vlan multicast-tv Global Configuration mode command
to define the Multicast IP addresses that are associated with a Multicast TV VLAN.
Use the no form of this command to remove all associations.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
•
vlan-id—Specifies the VLAN
•
number
count —Configures multiple contiguous Multicast IP addresses. If
not specified, the default is 1. (Range: 1–256)
Default Configuration
No Multicast IP address is associated.
Command Mode
Global Configuration mode
User Guidelines
Use this command to define the Multicast transmissions on a Multicast-TV VLAN.
The configuration is only relevant for an Access port that is a member in the
configured VLAN as a Multicast-TV VLAN.
If an IGMP message is received on such an Access port, it is associated with the
Multicast-TV VLAN only if it is for one of the Multicast IP addresses that are
associated with the Multicast-TV VLAN.
Up to 256 VLANs can be configured.
vlan-id ip-multicast-address [
multicast-tv
vlan-id
multicast-tv
78-21075-01 Command Line Interface Reference Guide
IGMP Snooping Commands
count
ip-multicast-address [
gi1
number]
number]
count