Rsa And Certificate Commands - Cisco 300 Series Cli Manual

RSA and Certificate Commands

Table 1: Keys Displayed with Show Commands
File Type Being Displayed
Startup Config
Running Config
Text-based CLI (local backup
config. file, mirror config. file or
remote backup config. file)
78-21075-01 Command Line Interface Reference Guide
Keys and Certificates
The device automatically generates default RSA/DSA keys and certificates at
following times:
• When the device is booted following a software upgrade.
• When the device is booted with an empty configuration.
• When user-defined keys/certificates are deleted.
Some commands in this section are used to generate user-defined RSA/DSA
keys and certificates that replace the default keys and are used by SSL and SSH
server commands. Other commands can be used to import these keys from an
external source.
These keys and certificates are stored in the configuration files.
Table 1 describes when these keys/certificates are displayed..
What is Displayed in a Show
Command Without Detailed
Only user-defined
keys/certificates.
Keys are not displayed.
Keys are displayed as they were
copied. There is no distinction
here between default and
user-defined keys.
What is Displayed in a Show
Command With Detailed
Option is not supported.
All keys (default and user-defined)
Option is not supported.
4
67