Disable; Login - Cisco 300 Series Cli Manual

User Interface Commands
78-21075-01 Command Line Interface Reference Guide
2.2

disable

The disable Privileged EXEC mode command leaves the Privileged EXEC mode
and returns to the User EXEC mode.
Syntax
privilege-level
disable [
Parameters
privilege-level—Reduces the privilege level to the specified privileged level. If
privilege level is left blank, the level is reduce to 1.
Default Configuration
The default privilege level is 1.
Command Mode
Privileged EXEC mode
Example
The following example returns the user to user level 7.
switchxxxxxx#
disable 7
switchxxxxxx#
2.3

login

The login EXEC mode command enables changing the user that is logged in.
When this command is logged in, the user is prompted for a username/password.
Syntax
login
Parameters
N/A
]
2
37