Default Configuration - Cisco 300 Series Cli Manual

Clock Commands
78-21075-01 Command Line Interface Reference Guide
Syntax
show sntp status
Parameters
N/A

Default Configuration

N/A
Command Mode
Privileged EXEC mode
Example
The following example displays the SNTP servers status.
switchxxxxxx# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast
Reference time is afe2525e.70597b34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Status
---------- -------
176.1.1.8 Up
176.1.8.179 Unknown
Anycast server:
Server Interface
---------- ---------
176.1.11.8 VLAN 118
Last response
---------------------
19:58:22.289 PDT Feb 19
2005
12:17.17.987 PDT Feb 19
2005
Status Last response
------ ------------
Up 9:53:21.789 PDT
Feb 19 2005
7
Offset Delay
[mSec] [mSec]
------
------
7.33 117.79
8.98 189.19
Offset Delay
[mSec] [mSec]
------ ------
7.19 119.89
151