Ipv6 Router Commands; Clear Ipv6 Neighbors; Ipv6 Address - Cisco 300 Series Cli Manual

IPv6 Router Commands

78-21075-01 Command Line Interface Reference Guide
44.1

clear ipv6 neighbors

Use the clear ipv6 neighbors command in Privileged EXEC mode to delete all
entries in the IPv6 neighbor discovery cache, except static entries.
Syntax
clear ipv6 neighbors
Parameters
N/A
Command Mode
Privileged EXEC
User Guidelines
Example
The following example deletes all entries, except static entries, in the neighbor
discovery cache:
clear ipv6 neighbors
44.2

ipv6 address

Use the ipv6 address command in Interface Configuration mode to configure an
IPv6 address based on an IPv6 general prefix and enable IPv6 processing on an
interface.
Use the no form of this command to remove the address from the interface.
Syntax
ipv6-address
ipv6 address
ipv6-address
no ipv6 address [
prefix-length
/
prefix-length
/ ]
44
725