Show Radius-Servers - Cisco 300 Series Cli Manual

RADIUS Commands
78-21075-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
Example
The following example sets all RADIUS server deadtimes to 10 minutes.
switchxxxxxx(config)#
18.8

show radius-servers

Use the show radius-servers Privileged EXEC mode command to display the
RADIUS server settings.
Syntax
show radius-servers
Command Mode
Privileged EXEC mode
Example
The following example displays RADIUS server settings:.
switchxxxxxx# show radius-servers
Port Port
IP address Auth Acct
---------- ---- ----
172.16.1.1 1812 1813
172.16.1.2 1812 1813
Global values
--------------
TimeOut: 3
Retransmit: 3
Deadtime: 0
Source IP: 172.16.8.1
radius-server deadtime
Time
Out
Retransmision
-----
------------
Global
Global
11
8
10
Dead Source
time IP
Priority
------ ------
--------
Global Global
1
Global Global
2
18
Usage
-----
All
All
279