Show Dot1X Users - Cisco 300 Series Cli Manual

22
332
Field
Server timeout
Session Time
MAC address
Authentication
Method
Termination Cause
State
Authentication
success
Authentication fails

22.13 show dot1x users

Use the show dot1x users Privileged EXEC mode command to display active
802.1X authenticated users for the device.
Syntax
show dot1x users [username username
Parameters
username—Specifies the supplicant username (Length: 1–160 characters)
Default Configuration
Display all users.
Command Mode
Privileged EXEC mode
Description
Number of seconds that the device waits for a
response from the authentication server before
resending the request.
Amount of time (HH:MM:SS) that the user is
logged in.
Supplicant MAC address.
Authentication method used to establish the
session.
Reason for the session termination.
Current value of the Authenticator PAE state
machine and of the Backend state machine.
Number of times the state machine received a
Success message from the Authentication
Server.
Number of times the state machine received a
Failure message from the Authentication
Server.
]
78-21075-01 Command Line Interface Reference Guide
802. 1 X Commands