Dot1X Reauthentication; Dot1X Timeout Reauth-Period - Cisco 300 Series Cli Manual

22
322
switchxxxxxx(config)#
switchxxxxxx(config-if)#
22.4

dot1x reauthentication

Use the dot1x reauthentication Interface Configuration mode command to enable
periodic re-authentication of the client. Use the no form of this command to return
to the default setting.
Syntax
dot1x reauthentication
no dot1x reauthentication
Parameters
N/A
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface configuration (Ethernet)
Example
switchxxxxxx(config)# interface gi1
switchxxxxxx(config-if)# dot1x reauthentication
22.5

dot1x timeout reauth-period

Use the dot1x timeout reauth-period Interface Configuration mode command to
set the number of seconds between re-authentication attempts. Use the no form
of this command to return to the default setting.
Syntax
dot1x timeout reauth-period
no dot1x timeout reauth-period
interface gi15
dot1x port-control auto
seconds
78-21075-01 Command Line Interface Reference Guide
802. 1 X Commands