Show Spanning-Tree Bpdu - Cisco 300 Series Cli Manual

Spanning-Tree Commands
78-21075-01 Command Line Interface Reference Guide
IST Master ID Priority
Address
Path Cost
Rem hops
Bridge ID Priority
Address
Hello Time 2 sec
Max hops 20
switchxxxxxx# show spanning-tree
Spanning tree enabled mode MSTP
Default port cost method: long
###### MST 0 Vlans Mapped: 1-9
CST Root ID Priority
Address
This switch is root for CST and IST master.
Root Port
Hello Time 2 sec
Max hops 20

31.30 show spanning-tree bpdu

Use the show spanning-tree bpdu EXEC mode command to display the BPDU
handling when spanning-tree is disabled.
Syntax
show spanning-tree bpdu
Parameters
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
•
detailed—Displays information for non-present ports in addition to present
ports.
32768
00:02:4b:19:7a:00
10000
19
32768
00:02:4b:29:7a:00
Max Age 20 sec Forward Delay 15 sec
32768
00:01:42:97:e0:00
gi1
Max Age 20 sec Forward Delay 15 sec
[interface-id | detailed
]
31
485