Show Mirror-Configuration Service - Cisco 300 Series Cli Manual

Configuration and Image File Commands
78-21075-01 Command Line Interface Reference Guide
Parameters
N/A
Default Configuration
The default configuration is mirror-configuration service enabled.
Command Mode
Global Configuration mode
User Guidelines
The mirror-configuration service
configuration (startup configuration that wasn't modified for 24H). The mirror-configuration
file is not deleted when restoring to factory defaults.
When this service is disabled, the mirror-configuration file is not created and if
such file already exists, it is deleted.
Note that enabling the service doesn't implicitly creates a mirror-configuration file.
Examples
Example 1: The following example disables the mirror-configuration service
no service mirror-configuration
This operation will delete the mirror-config file if exists. Do you want to
continue? (Y/N) [N]
Example 2: The following example enables the mirror-configuration service
service mirror-configuration
Service is enabled.
Note that the running-configuration must be first copied to the
startup-configuration in order to initiate backing up the startup-config to the
mirror-config.
9.12

show mirror-configuration service

Use the show mirror-configuration service EXEC mode command to display the
mirror-configuration service status.
automatically keeps a copy of the last known stable
9
183