Show Dot1X - Cisco 300 Series Cli Manual

802. 1 X Commands
78-21075-01 Command Line Interface Reference Guide
Example
The following example sets the time interval between retransmission of packets to
the authentication server to 3600 seconds.
switchxxxxxx(config)#
switchxxxxxx(config-if)#

22.12 show dot1x

Use the show dot1x Privileged EXEC mode command to display the 802.1X
interfaces or specified interface status.
Syntax
[interface interface-id | detailed
show dot1x
Parameters
•
interface-id—Specify an Ethernet port ID.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Display for all ports. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
interface gi15
dot1x timeout server-timeout
]
22
3600
329