Eee Lldp Enable - Cisco 300 Series Cli Manual

26
EEE Commands
Syntax
eee enable
no eee enable
Parameters
N/A
Default Configuration
EEE is enabled.
Command Mode
Interface Configuration mode (Ethernet)
User Guidelines
If Auto-Negotiation is not enabled on the port and its speed is 1 Giga, the EEE
Operational status is disabled.
Example
witchxxxxxx(config)#interface gi1
witchxxxxxx(config-if)#eee enable
26.3

eee lldp enable

Use the eee lldp enable Interface Configuration command to enable EEE support
by LLDP on an Ethernet port. Use the no format of the command to disable the
support.
Syntax
eee lldp enable
no eee lldp enable
Parameters
N/A
386 78-21075-01 Command Line Interface Reference Guide