System Administration Parameters
Updating the Golden Bootstrap Image
The admin>update-golden-bootstrap command validates the input file, which must be a 7210
SAS M bootstrap image, and updates the golden bootstrap image with the contents of this file.
CLI Syntax: admin
Example
The following is an example of the output.
Updating Golden Bootstrap Image from "boot.tim"
This operation must not be interrupted
Updating Golden Bootstrap image .... Completed.
Disconnect
The
disconnect
session.
Note: Configuration modifications are saved to the primary image file.
CLI Syntax: admin
Example
The following example displays the disconnect command results.
ALA-1>admin# disconnect
ALA-1>admin# Logged out by the administrator
Connection to host lost.
C:\>
Page 286
update-golden-bootstrap [<file-url>]
:
admin# update-golden-bootstrap boot.tim
command immediately disconnects a user from a console, Telnet, FTP, or SSH
disconnect [address ip-address |username user-name |
{console|telnet|ftp|ssh}]
:
admin# disconnect
7210 SAS M, T, X, R6 Basic System Configuration Guide