Alcatel-Lucent 7210 SAS M Configuration Manual page 485

===============================================================================
Peer Addr
-------------------------------------------------------------------------------
Packets Rx
Packets Rx Keepalive
Packets Rx Config
Packets Rx Peer Config
Packets Rx State
Packets Dropped State Disabled
Packets Dropped Packets Too Short : 0
Packets Dropped Tlv Invalid Size
Packets Dropped Tlv Invalid LagId : 0
Packets Dropped Out of Seq
Packets Dropped Unknown Tlv
Packets Dropped MD5
Packets Tx
Packets Tx Keepalive
Packets Tx Peer Config
Packets Tx Failed
Packets Dropped No Peer
===============================================================================
*A:Dut-B#
*A:Dut-B# show redundancy multi-chassis mc-endpoint
===============================================================================
Multi-Chassis Endpoint Statistics
===============================================================================
===============================================================================
MC-Endpoint Id 1
===============================================================================
Packets Rx Config
Packets Rx State
Packets Tx Config
Packets Tx State
Packets Tx Failed
===============================================================================
Number of Entries 1
===============================================================================
mc-lag
Syntax mc-lag [lag lag-id]
mc-lag peer ip-address
Context show>redundancy>multi-chassis
Description
This command displays multi-chassis LAG information.
Parameters lag lag-id — Shows information for the specified LAG identifier.
mc-ring
7210 SAS M, T, X, R6 Basic System Configuration Guide
lag lag-id
[
Values
1 — 20020064
: 3.1.1.3
: 597
: 586
: 3
: 1
: 7
: 0
: 0
: 0
: 0
: 0
: 636
: 600
: 30
: 0
: 0
: 3
: 7
: 2
: 4
: 0
statistics
]]
System Management
endpoint 1 statistics
Page 485