Alcatel-Lucent 7210 SAS M Configuration Manual page 461

Sample Output
A:pc-40>config>system>time>ntp# show system ntp
===============================================================================
NTP Status
===============================================================================
Enabled
Admin Status
Server enabled
System Ref Id
===============================================================================
A:pc-40>config>system>time>ntp# show system ntp all
===============================================================================
7210 SAS M, T, X, R6 Basic System Configuration Guide
Label
St
Auth
Poll
R
Offset
: Yes
: up
: No
: 192.168.15.221
Description (Continued)
DROP — Lost peer in symmetric mode. Please wait while the associa-
tion is restarted.
RSTR — Access denied due to local policy. No further messages will
be sent to the server.
INIT — The association has not yet synchronized for the first time.
MCST — The association belongs to a manycast server.
NKEY — No key found. Either the key was never installed or is not
trusted.
RATE — Rate exceeded. The server has temporarily denied access
because the client exceeded the rate threshold.
RMOT — The association from a remote host running ntpdc has had
unauthorized attempted access.
STEP — A step change in system time has occurred, but the associa-
tion has not yet resynchronized.
System Codes
INIT — The system clock has not yet synchronized for the first time.
STEP — A step change in system time has occurred, but the system
clock has not yet resynchronized.
Stratum level of this node.
yes — Authentication is enabled.
no — Authentication is disabled.
Polling interval in seconds.
Yes — The NTP peer or server has been reached at least once in the
last 8 polls.
No — The NTP peer or server has not been reached at least once in
the last 8 polls.
The time between the local and remote UTC time, in milliseconds.
Stratum
Oper Status
Server keyId
Auth Check
System Management
: 3
: up
: none
: Yes
Page 461