Alcatel-Lucent 7210 SAS M Configuration Manual page 65

The output of this command is similar to the output of a show config command. This command, how-
ever, lists the configuration of the context where it is entered and all branches below that context
level.
By default, the command only enters the configuration parameters that vary from the default values.
The detail keyword causes all configuration parameters to be displayed.
For example,
Parameters
detail — Displays all configuration parameters including parameters at their default values.
logout
Syntax logout
Context <GLOBAL>
Description
This command logs out of the router session.
When the logout command is issued from the console, the login prompt is displayed, and any log IDs
directed to the console are discarded. When the console session resumes (regardless of the user), the
log output to the console resumes.
When a Telnet session is terminated from a logout command, all log IDs directed to the session are
removed. When a user logs back in, the log IDs must be re-created.
password
Syntax password
Context <ROOT>
Description
This command changes a user CLI login password.
When a user logs in after the administrator forces a new-password-at-login, or the password has
expired (aging), then this command is automatically invoked.
When invoked, the user is prompted to enter the old password, the new password, and then the new
password again to verify the correct input.
If a user fails to create a new password after the administrator forces a new-password-at-login or
after the password has expired, the user is not allowed access to the CLI.
ping
Syntax ping {ip-address | dns-name} [rapid | detail] [ttl time-to-live] [tos type-of-service] [size
bytes] [pattern pattern] [source ip-address] [interval seconds] [{next-hop ip-address} |
7210 SAS M, T, X, R6 Basic System Configuration Guide
Root Commands
Page 65