Alcatel-Lucent 7210 SAS M Configuration Manual page 345

startup-alarm alarm-type — Specifies the alarm that may be sent when this alarm is first created. If
Configuration example:
event
Syntax event rmon-event-id [event-type] [description description-string] [owner owner-string]
no event rmon-event-id
Context config>system>thresholds>rmon
Description The event command configures an entry in the RMON-MIB event table. The event command controls
the generation and notification of threshold crossing events configured with the alarm command.
When a threshold crossing event is triggered, the rmon>event configuration optionally specifies if an
entry in the RMON-MIB log table should be created to record the occurrence of the event. It may also
specify that an SNMP notification (trap) should be generated for the event. The RMON-MIB defines
two notifications for threshold crossing events: Rising Alarm and Falling Alarm.
Creating an event entry in the RMON-MIB log table does not create a corresponding entry in the
TiMOS event logs. However, when the event-type is set to trap, the generation of a Rising Alarm or
Falling Alarm notification creates an entry in the TiMOS event logs and that is distributed to
whatever TiMOS log destinations are configured: CONSOLE, session, memory, file, syslog, or
SNMP trap destination.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values
log — In the case of log, an entry is made in the RMON-MIB log table for each
event occurrence. This does not create a TiMOS logger entry. The RMON-MIB log
table entries can be viewed using the show>system>thresholds CLI command.
trap — In the case of trap, a TiMOS logger event is generated. The TiMOS logger
utility then distributes the notification of this event to its configured log
destinations which may be CONSOLE, telnet session , memory log, cflash file,
syslog, or SNMP trap destinations logs.
both — In the case of both, both a entry in the RMON-MIB logTable and a TiMOS
logger event are generated.
none — In the case of none, no action is taken.
Default
both
the first sample is greater than or equal to the rising threshold value and startup-alarm is equal to
rising or either, then a single rising threshold crossing event is generated. If the first sample is
less than or equal to the falling threshold value and startup-alarm is equal to falling or either, a
single falling threshold crossing event is generated.
Values rising, falling, either
Default
either
cflash-cap-warn cf1-B: rising-threshold 2000000 falling-threshold 1999900 interval 240 rmon-
event-type trap start-alarm either
System Management
Page 345