Alcatel-Lucent 7210 SAS M Configuration Manual page 403

This includes the saved configuration and CFM images.
The active
CFM
initialization configurations must also be automatically synchronized between the active and standby
CPM/CFM
If synchronization fails, alarms and log messages that indicate the type of error that caused the failure
of the synchronization operation are generated. When the error condition ceases to exist, the alarm is
cleared.
Only files stored on the router are synchronized. If a configuration file or image is stored in a location
other than on a local compact flash, the file is not synchronized (for example, storing a configuration
file on an FTP server).
Default
enabled
Parameters boot-env — Synchronizes all files required for the boot process (loader, BOF, images, and config).
config — Synchronize only the primary, secondary, and tertiary configuration files.
multi-chassis
Syntax multi-chassis
Context config>redundancy
Description This command enables the context to configure multi-chassis parameters.
7210 SAS M, T, X, R6 Basic System Configuration Guide
CPM/CFM
ensures that the active configuration is maintained on the standby
. However, to ensure smooth operation under all circumstances, runtime images and system
.
Default
config
System Management
CPM/
Page 403