Alcatel-Lucent 7210 SAS M Configuration Manual page 74

CLI Environment Commands
terminal
Syntax terminal
no terminal
Context environment
Description This command enables the context to configure the terminal screen length for the current CLI session.
length
Syntax length lines
Context environment>terminal
Default
24 — Terminal dimensions are set to 24 lines long by 80 characters wide.
Parameters lines — The number of lines for the terminal screen length, expressed as a decimal integer.
time-display
Syntax time-display {local | utc}
Context environment
Description This command displays time stamps in the CLI session based on local time or Coordinated Universal
Time (UTC).
The system keeps time internally in UTC and is capable of displaying the time in either UTC or local
time based on the time zone configured.
This configuration command is only valid for times displayed in the current CLI session. This
includes displays of event logs, traps and all other places where a time stamp is displayed.
In general all time stamps are shown in the time selected. This includes log entries destined for con-
sole/session, memory, or SNMP logs. Log files on compact flash are maintained and displayed in
UTC format.
Default
time-display local — Displays time stamps based on the local time.
time-stamp
Syntax time-stamp
Context environment
Description
This command displays time stamps in the CLI session.
Page 74
Values
1 — 512
7210 SAS M, T, X, R6 Basic System Configuration Guide