Alcatel-Lucent 7210 SAS M Configuration Manual page 279

Status
Periodic
Weekly
The weekly command configures the start and end of a periodic schedule for the same day every
week, for example, every Friday. The start and end dates must be the same. The resolution must be
at least one minute apart, for example, start at 11:00 and end at 11:01. A start time and end time of
11:00 is invalid.
CLI Syntax: config>cron>time-range$
Example
The following command shows a weekly time range beginning on Friday at 1:01am ending Friday
at 1:02am.
A:sim1>config>cron>time-range$ info
----------------------------------------------
----------------------------------------------
A:sim1>config>cron>time-range$
7210 SAS M, T, X, R6 Basic System Configuration Guide
: Inactive
: weekend Start 11:00 End 12:00
weekly start time-in-week end time-in-week
:
config>cron>time-range$ start fri,01:01 end fri,01:02
config>cron>time-range$
weekly start fri,01:01 end fri,01:02
System Management
Page 279