Alcatel-Lucent 7210 SAS M Configuration Manual page 66

Service access switch
Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Global Commands
{interface interface-name} | bypass-routing] [count requests] [do-not-fragment] [router
[router-instance] [timeout timeout]
Context
<GLOBAL>
Description
This command is the TCP/IP utility to verify IP reachability.
Parameters
ip-address | dns-name — The remote host to ping. The IP address or the DNS name (if DNS name
rapid | detail — The rapid parameter specifies to send ping requests rapidly. The results are reported
Example output:
*A:ALU-7210# ping 192.xxx.xxx.xxx
PING 192.xxx.xxx.xxx 56 data bytes
64 bytes from 192.xxx.xxx.xxx: icmp_seq=1 ttl=64 time<10ms.
64 bytes from 1192.xxx.xxx.xxx: icmp_seq=2 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=3 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=4 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=5 ttl=64 time<10ms.
---- 192.xxx.xxx.xxx PING Statistics ----
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min < 10ms, avg < 10ms, max < 10ms, stddev < 10ms
*A:ALU-7210#
ttl time-to-live — The IP Time To Live (TTL) value to include in the ping request, expressed as a
tos type-of-service — The type-of-service (TOS) bits in the IP header of the ping packets, expressed
size bytes — The size in bytes of the ping request packets.
Page 66
resolution is configured) can be specified.
Values
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
in a single message, not in individual messages for each ping request. By default, five ping
requests are sent before the results are reported. To change the number of requests, include the
count option.
The detail parameter includes in the output the interface on which the ping reply was received.
decimal integer.
Values
0 —128
as a decimal integer.
Values
0 — 255
Default
56 bytes (actually 64 bytes because 8 bytes of ICMP header data are added to the
packet)
Values
0 — 65507
7210 SAS M, T, X, R6 Basic System Configuration Guide
x:x:x:x:x:x:x:x [-interface]
x:x:x:x:x:x:d.d.d.d
x: 0 — FFFF H
d: 0 — 255 D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents