Alcatel-Lucent 7210 SAS M Configuration Manual page 343

falling-threshold threshold — Specifies a threshold for the sampled statistic. When the current
interval seconds — Specifies the polling period, in seconds, over which the data is sampled and
rmon-event-type — Specifies the type of notification action to be taken when this event occurs.
startup-alarm alarm-type — Specifies the alarm that may be sent when this alarm is first created.
Configuration example:
7210 SAS M, T, X, R6 Basic System Configuration Guide
After a rising threshold crossing event is generated, another such event will not be generated
until the sampled value falls below this threshold and reaches less than or equal the 'falling-
threshold' value.
Default
0
Values
-2147483648 — 2147483647
sampled value is less than or equal to this threshold, and the value at the last sampling interval
was greater than this threshold, a single threshold crossing event will be generated. A single
threshold crossing event will also be generated if the first sample taken is less than or equal to
this threshold and the associated startup-alarm is equal to falling or either.
After a rising threshold crossing event is generated, another such event will not be generated
until the sampled value raises above this threshold and reaches greater than or equal the rising-
threshold value.
Default 0
Values
-2147483648 — 2147483647
compared with the rising and falling thresholds.
Values
1 — 2147483647
Values log — An entry is made in the RMON-MIB log table for each event occurrence.
This does not create a TiMOS logger entry. The RMON-MIB log table entries can
be viewed using the show>system>thresholds CLI command.
trap — A TiMOS logger event is generated. The TiMOS logger utility then
distributes the notification of this event to its configured log destinations which
may be CONSOLE, telnet session , memory log, cflash file, syslog, or SNMP trap
destinations logs.
both — Both a entry in the RMON-MIB logTable and a TiMOS logger event are
generated.
none — No action is taken.
Default both
If the first sample is greater than or equal to the rising threshold value and startup-alarm is equal
to rising or either, then a single rising threshold crossing event is generated.
If the first sample is less than or equal to the falling threshold value and startup-alarm is equal to
falling or either, a single falling threshold crossing event is generated.
Default either
Values rising, falling, either
System Management
Page 343