Alcatel-Lucent 7210 SAS M Configuration Manual page 149

a USB flash drive, or on the network.
Here are some examples
cf1:/timos1.0R1
uf1:/timos1.0R1
ftp://user:passwd@192.168.1.150/./timos1.0R1
ftp://user:passwd@[3FFE::1]/./timos1.0R1
tftp://192.168.1.150/./timos1.0R1
tftp://[3FFE::1]/./timos1.0R1
The existing Image URL is 'ftp://*:*@135.250.26.204/tmp/sasr/b/'
Press ENTER to keep it.
Software Image URL:
Using: 'ftp://*:*@135.250.26.204/tmp/sasr/b/'
Configuration File Location
---------------------------
You must enter the location of configuration
file to be used by TiMOS.
a Compact Flash device, a USB flash drive, or
on the network.
Here are some examples
uf1:/config.cfg
cf1:/config.cfg
ftp://user:passwd@192.168.1.150/./config.cfg
ftp://user:passwd@[3FFE::1]/./config.cfg
tftp://192.168.1.150/./config.cfg
tftp://[3FFE::1]/./config.cfg
The existing Config URL is 'uf1:\SASR2553.cfg'
Press ENTER to keep it, or the word 'none' for no Config URL.
Config File URL:
Using: 'uf1:\SASR2553.cfg'
Network Configuration
---------------------
You specified a network location for either the
software or the configuration file.
assign an IP(v6) address for this system.
The IP address should be entered in standard
dotted decimal form with a network length.
Existing eth-mgmt port settings are:
eth-mgmt-port
eth-mgmt-address
eth-mgmt-address
eth-mgmt-address
eth-mgmt-address
eth-mgmt-route
eth-mgmt-route
eth-mgmt-route
eth-mgmt-route
7210 SAS M, T, X, R6 Basic System Configuration Guide
example: 192.168.1.169/24
10.135.25.53/24 active
10.135.25.54/24 standby
0 active
0 standby
2.2.2.0/24 next-hop 10.135.25.1
3.3.3.0/24 next-hop 10.135.25.1
10.135.0.0/16 next-hop 10.135.25.1
135.0.0.0/8 next-hop 10.135.25.1
The file can be on
You need to
Boot Option Files
Page 149