Alcatel-Lucent 7210 SAS M Configuration Manual page 78

Monitor CLI Commands
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
===============================================================================
*A:7210SAS>monitor>filter#
mac
Syntax mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>filter
Description
This command enables MAC filter monitoring. The statistical information for the specified MAC
filter entry displays at the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified MAC filter. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display. When the
keyword rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters
mac-filter-id — The MAC filter policy ID.
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID only.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
Sample Output
A:ALA-1>monitor>filter# mac 50 entry 10 interval 3 repeat 3 absolute
===============================================================================
Page 78
Values
1 — 65535
Values 1 — 65535
Default
5 seconds
Values
3 — 60
Default
10
Values
1 — 999
of the delta.
7210 SAS M, T, X, R6 Basic System Configuration Guide