Alcatel-Lucent 7210 SAS M Configuration Manual page 486

System Commands
Syntax mc-ring peer ip-address statistics
mc-ring peer ip-address [ring sync-tag [detail|statistics] ]
mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail|statistics] ]
mc-ring global-statistics
Context show>redundancy>multi-chassis
Description This command displays multi-chassis ring information.
Parameters
ip-address — Specifies the address of the multi-chassis peer to display.
ring sync-tag — Specifies a synchronization tag to be displayed that was used while synchronizing
node ring-node-name — Specifies a ring-node name.
global-statistics — Displays global statistics for the multi-chassis ring.
detail — Displays detailed peer information for the multi-chassis ring.
Output Show mc-ring peer ip-address ring Output — The following table describes mc-ring peer ip-
address ring output fields.
Page 486
this port with the multi-chassis peer.
Label
Displays the synchronization tag that was used while synchronizing this port
Sync Tag
with the multi-chassis peer.
noPeer — The peer has no corresponding ring configured.
Oper State
connected — The inband control connection with the peer is operational.
broken — The inband control connection with the peer has timed out.
conflict — The inband control connection with the peer has timed out
but the physical connection is still OK; the failure of the inband signaling con-
nection is caused by a misconfiguration. For example, a conflict between the
configuration of this system and its peer, or a misconfiguration on one of the
ring access node systems.
testingRing — The inband control connection with the peer is being set
up. Waiting for result.
waitingForPeer — Verifying if this ring is configured on the peer.
configErr — The ring is administratively up, but a configuration error
prevents it from operating properly.
halfBroken — The inband control connection indicates that the ring is
broken in one direction (towards the peer).
localBroken — The inband control connection with the peer is known to
be broken due to local failure or local administrive action.
shutdown
7210 SAS M, T, X, R6 Basic System Configuration Guide
Description
— The ring is shutdown.