Alcatel-Lucent 7210 SAS M Configuration Manual page 151

tertiary-config
#eth-mgmt Port Settings:
no
eth-mgmt-address
eth-mgmt-address
eth-mgmt-route
eth-mgmt-route
eth-mgmt-route
eth-mgmt-route
eth-mgmt-autoneg
eth-mgmt-duplex
eth-mgmt-speed
#System Settings:
wait
persist
console-speed
no
Do you want to overwrite cf1:/bof.cfg with the new settings? (yes/no): y
Successfully saved the new settings in cf1:/bof.cfg
Configuring Network with eth-mgmt Port Setting.....
Primary config file present at: uf1:\SASR2553.cfg
Sap Index file present at: uf1:\SASR2553.sdx
Primary image location: ftp://*:*@135.250.26.204/tmp/sasr/b/
Initial DNS resolving preference is ipv4-only
Loading image ftp://*:*@135.250.26.204/tmp/sasr/b/cpm.tim
Version C-6.1.R3, Wed Jun
main
text:(35757600-->121586864)
telnet>
7210 SAS M, T, X, R6 Basic System Configuration Guide
cf2:\SASR2553.cfg
eth-mgmt-disabled
10.135.25.53/24 active
10.135.25.54/24 standby
2.2.2.0/24 next-hop 10.135.25.1
3.3.3.0/24 next-hop 10.135.25.1
10.135.0.0/16 next-hop 10.135.25.1
135.0.0.0/8 next-hop 10.135.25.1
full
100
3
off
115200
console-disabled
4 10:32:00 IST 2014 by builder in /home/builder/6.1B1/R3/panos/
Boot Option Files
Page 151