Table 35: Show System Time Output Fields - Alcatel-Lucent 7210 SAS M Configuration Manual

================================================================
A:ALA-48#
time
Syntax time
Context show>system
Description
This command displays the system time and zone configuration parameters.
Output System Time Output — The following table describes system time output fields.

Table 35: Show System Time Output Fields

Sample Output
A:ALA-1# show system time
===============================================================================
Date & Time
===============================================================================
Current Date & Time : 2006/05/05 23:03:13
Current Zone
-------------------------------------------------------------------------------
7210 SAS M, T, X, R6 Basic System Configuration Guide
Label
Date & Time
DST Active
Zone
Zone type
Offset from UTC
Offset from Non-
DST
Starts
Ends
: PDT
The system date and time using the current time zone.
Yes — Daylight Savings Time is currently in effect.
No — Daylight Savings Time is not currently in effect.
The zone names for the current zone, the non-DST zone, and the DST
zone if configured.
Non-standard — The zone is user-defined.
Standard — The zone is system defined.
The number of hours and minutes added to universal time for the zone,
including the DST offset for a DST zone
The number of hours (always 0) and minutes (0—60) added to the time
at the beginning of Daylight Saving Time and subtracted at the end
Daylight Saving Time.
The date and time Daylight Saving Time begins.
The date and time Daylight Saving Time ends.
DST Active
Offset from UTC
System Management
Description
: yes
: -7:00
Page 473