Alcatel-Lucent 7210 SAS M Configuration Manual page 369

Parameters
date — Specifies the date to schedule a command.
day-name — Specifies the day of the week to schedule a command.
time — Specifies the time of day to schedule a command.
hour
Syntax [no] hour {..hour-number [..hour-number]| all}
Context config>cron>sched
Description This command specifies which hour to schedule a command. Multiple hours of the day can be
specified. When multiple hours are configured, each of them will cause the schedule to trigger. Day-
of-month or weekday must also be specified. All days of the month or weekdays can be specified. If
an hour is configured without configuring month, weekday, day-of-month, and minute, the event will
not execute.
The no form of this command removes the specified hour from the configuration.
Parameters hour-number — Specifies the hour to schedule a command.
all — Specifies all hours.
interval
Syntax [no] interval seconds
Context config>cron>sched
Description This command specifies the interval between runs of an event.
Parameters
seconds — The interval, in seconds, between runs of an event.
minute
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values
YYYY:MM:DD in year:month:day number format
Values sunday|monday|tuesday|wednesday|thursday|friday|saturday
Values
hh:mm in hour:minute format
Values
0 — 23 (maximum 24 hour-numbers)
Values 30 — 4,294,967,295
System Management
Page 369