Alcatel-Lucent 7210 SAS M Configuration Manual page 449

-------------------------------------------------------------------------------
Total
Busiest Core Utilization
===============================================================================
*A:cses-E11#
cron
Syntax cron
Context show>cron
Description
This command enters the show CRON context.
action
Syntax action [action-name] [owner action-owner] run-history run-state
Context show>cron#
Description This command displays cron action parameters.
Parameters
action action-name — Specifies the action name.
owner action-owner — Specifies the owner name.
run-history run-state — Specifies the state of the test to be run.
Output
The following table describes the show cron action output fields.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Idle
Usage
Values maximum 32 characters
Default
TiMOS CLI
Values executing, initializing, terminated
Label
Action
Action owner
Administrative
status
Script
Script owner
2,014,761
1,945,113
69,648
69,648
Displays the name of the action.
The name of the action owner.
Enabled — Administrative status is enabled
Disabled — Administrative status is disabled
The name of the script
The name of the script owner.
System Management
100.00%
96.54%
3.45%
3.45%
Description
Page 449