Alcatel-Lucent 7210 SAS M Configuration Manual page 415

notification-interval
Syntax notification-interval time
no notification-interval
Context config>system>lldp
Description
This command configures the minimum time between change notifications.
Parameters time — Specifies the minimum time, in seconds, between change notifications.
reinit-delay
Syntax reinit-delay time
no reinit-delay
Context config>system>lldp
Description
This command configures the time before re-initializing LLDP on a port.
Parameters
time — Specifies the time, in seconds, before re-initializing LLDP on a port.
tx-credit-max
Syntax tx-credit-max count
no tx-credit-max
Context config>system>lldp
Description This command configures the maximum consecutive LLDPDUs transmitted.
Parameters count — Specifies the maximum consecutive LLDPDUs transmitted.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Values 5 — 3600
Default
5
Values
1 — 10
Default 2
Values
1 — 100
Default
5
System Management
Page 415