Alcatel-Lucent 7210 SAS M Configuration Manual page 466

System Commands
Sample Output for 7210 SAS-M
*A:7210>show>system# resource-profile
A:SAS-MX>show>system# resource-profile
===============================================================================
Active System Resource Profile Information
===============================================================================
-------------------------------------------------------------------------------
IPv6 FIB
-------------------------------------------------------------------------------
max-ipv6-routes
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Router
-------------------------------------------------------------------------------
system-max-ecmp
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Ingress Internal CAM
-------------------------------------------------------------------------------
Sap Ingress Qos resource
-------------------------------------------------------------------------------
IPv4 Resource
IPv4-IPv6 Resource
-------------------------------------------------------------------------------
Sap Ingress ACL resource
-------------------------------------------------------------------------------
IPv4 Resource
IPv4-IPv6 128 bit Resource : disable
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Eth CFM
-------------------------------------------------------------------------------
up-mep
Page 466
Table 33: Show system resource-profile output fields.
Label
IPv6 FIB
G8032-fast-flood
Decommissioned
Ports
MBS pool
7210 SAS M, T, X, R6 Basic System Configuration Guide
Displays the amount of IPv6 FIB size configured for use by IPv6
routing.
Displays the resources configured for use by G8032 fast-flood
feature.
Disable – No resources are allocated for use by this feature.
The list of ports which have been decommissioned by the user.
Services cannot be configured on these ports.
Displays the value configured for mbs-pool. It is available only
on 7210 SAS-T.
: disable
: 1
: 5 Sap Aggregate Meter
: max Mac Resource
: disable
: 5
: max Mac Resource
IPv6 64 bit Resource
: disable
: disable G8032-fast-flood
Description
: 1
: max
: max
: disable
: disable