Alcatel-Lucent 7210 SAS M Configuration Manual page 462

System Commands
NTP Status
===============================================================================
Enabled
Admin Status
Server enabled
System Ref Id
===============================================================================
NTP Active Associations
===============================================================================
State
-------------------------------------------------------------------------------
reject
chosen
===============================================================================
A:pc-40>config>system>time>ntp#
oper-group
Syntax oper-group [group-name]
oper-group group-name [detail]
oper-group group-name [monitoring]
Context show>system
Description This command displays the oper-group information, member count, monitor-client count, and status
in a single line for each of the configured oper-groups.
Output Show oper-group Output — The following table describes oper-group output fields.
Show Output
*A:7210SAS>show>system# oper-group
Page 462
: Yes
: up
: No
: 192.168.15.221
Remote
192.168.15.221
192.168.15.221
Label
Name
Oper Status
Creation Origin
Hold Up Time
Hold Dn Time
Members
Monitor
7210 SAS M, T, X, R6 Basic System Configuration Guide
Stratum
Oper Status
Server keyId
Auth Check
Reference ID St
192.168.14.50 2
192.168.14.50 2
Displays the name of the oper-group.
The operational status of the oper-group.
Displays if it was created manually.
The configured HOLD UP time.
The configured HOLD down time.
Displays the number of members of the oper-group.
Displays the number of monitoring clients.
: 3
: up
: none
: Yes
Type Auth Poll R
srvr none 64 y
mclnt none 64 y
Description
Offset
0.901
1.101