Alcatel-Lucent 7210 SAS M Configuration Manual page 274

Common Configuration Tasks
----------------------------------------------
A:sim1>config>cron# script
Schedule
The schedule function configures the type of schedule to run, including one-time only (oneshot),
periodic or calendar-based runs. All runs are determined by month, day of month or weekday,
hour, minute and interval (seconds). If end-time and interval are both configured, whichever
condition is reached first is applied.
CLI Syntax: config>cron
Example
The following example schedules a script named "test2" to run every 15 minutes on the 17th of
each month and every Friday until noon on July 17, 2007:
*A:SR-3>config>cron# info
----------------------------------------------
Page 274
no shutdown
exit
action "test"
results "ftp://172.22.184.249/./sim1/test-results"
no shutdown
exit
schedule schedule-name [owner schedule-owner]
action action-name [owner owner-name]
count number
day-of-month {day-number [..day-number]|all}
description description-string
end-time [date|day-name] time
hour {hour-number [..hour-number] | all}
interval seconds
minute {minute-number [..minute-number]|all}
month {month-number [..month-number]|month-name
[..month-name]|all}
no shutdown
type {periodic|calendar|oneshot}
weekday {weekday-number [..weekday-number]|day-name
[..day-name]|all}
shutdown
:
config>cron# schedule test2
config>cron>sched# day-of-month 17
config>cron>sched# end-time 2007/07/17 12:00
config>cron>sched# minute 0 15 30 45
config>cron>sched# weekday friday
config>cron>sched# shut
schedule "test2"
shutdown
day-of-month 17
minute 0 15 30 45
weekday friday
7210 SAS M, T, X, R6 Basic System Configuration Guide