Figure 6: Bootstrap Process - System Initialization - Part Ii-B - Alcatel-Lucent 7210 SAS M Configuration Manual

Configuration and Image Loading
Restart
Ctrl-D
R
Provision The BOF Parameters (Few Are Mentioned
Below) (Secondary/Tertiary Parameters Are Optional)
Image And Config Path (Primary/Secondary/Tertiary),
Safe-boot IP, UplinkA (Port, Vlan, IP/Mask, Static-route),
UplinkB (Port, Vlan, IP/Mask, Static-route), Persist.
Page 128
Manual
M
Mode
User Login
Successful?
Yes
Save BOF
Successful?
No
Old BOF
Present?
No
Restart R

Figure 6: Bootstrap Process - System Initialization - Part II-B

7210 SAS M, T, X, R6 Basic System Configuration Guide
No
If the IP information needs to be obtained from
DHCP server, IP Address shall be configured
as 0 instead of specifying any IP Address.
DHCP server should grant IP address/mask
and the GW.
Yes
Yes
Revert To Old BOF
Retry User Login
Set Bootflag To
NORMAL_BOOT
B
OSSG284