Table 34: Show System Sntp Output Fields - Alcatel-Lucent 7210 SAS M Configuration Manual

System Commands
PTP Recovery State: disabled
Frequency Offset
-------------------------------------------------------------------------------
Parent Clock
-------------------------------------------------------------------------------
IP Address
Parent Clock Id
GM Clock Id
GM Clock Accuracy : within 100 ns
GM Clock Priority1: 128
===============================================================================
-------------------------------------------------------------------------------
Time Information
-------------------------------------------------------------------------------
Timescale
Current Time
Frequency Traceable : yes
Time Traceable
Time Source
===============================================================================
===============================================================================
A:7210SAS>show>system#
sntp
Syntax sntp
Context show>system
Description
This command displays SNTP protocol configuration and state.
Output Show SNTP Output — The following table describes SNTP output fields.

Table 34: Show System SNTP Output Fields

Sample Output
thresholds
Page 470
: n/a
: 221.0.0.2
: 4c5fd2fffe295072
: 00b0aefffe02e5e5
: PTP
: 2012/12/13 11:05:43 (UTC)
: yes
: GPS
Label
SNTP Server
Version
Preference
Interval
7210 SAS M, T, X, R6 Basic System Configuration Guide
Remote PTP Port
GM Clock Class
GM Clock Variance
GM Clock Priority2 : 128
The SNTP server address for SNTP unicast client mode.
The SNTP version number, expressed as an integer.
Normal — When more than one time server is configured, one
server can be configured to have preference over another.
Preferred — Indicates that this server has preference over another.
The frequency, in seconds, that the server is queried.
: 5
: 6
: 0x6400 (3.7E-09)
Description