Alcatel-Lucent 7210 SAS M Configuration Manual page 331

Each persistent index file is updated at the same time as the associated configuration file. When the
index file is updated, then the save is performed to xyz.cfg and the index file is created as xyz.ndx.
Synchronization between the active and standby is performed for all configurations and their
associated persistent index files.
The no form of the command returns the configuration to the default value.
Default
5
Parameters
count — The maximum number of backup revisions.
contact
Syntax contact contact-name
no contact
Context config>system
Description This command creates a text string that identifies the contact name for the device.
Only one contact can be configured, if multiple contacts are configured the last one entered will
overwrite the previous entry.
The no form of the command reverts to default.
Default
none — No contact name is configured.
Parameters
contact-name — The contact name character string. The string can be up to 80 characters long. Any
coordinates
7210 SAS M, T, X, R6 Basic System Configuration Guide
xyz.cfg
xyz.cfg.1
xyz.cfg.2
xyz.cfg.3
xyz.cfg.4
xyz.cfg.5
xyz.ndx
Values
1 — 9
printable, seven-bit ASCII characters can be used within the string. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
System Management
Page 331