Alcatel-Lucent 7210 SAS M Configuration Manual page 79

Monitor statistics for Mac filter 50 entry 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches: 0
------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Ing. Matches: 0
===============================================================================
A:ALA-1>monitor>filter# mac 50 entry 10 interval 3 repeat 3 rate
===============================================================================
Monitor statistics for Mac filter 50 entry 10
===============================================================================
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Ing. Matches: 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Rate)
-------------------------------------------------------------------------------
Ing. Matches: 0
-------------------------------------------------------------------------------
At time t = 6 sec (Mode: Rate)
-------------------------------------------------------------------------------
Ing. Matches: 0
-------------------------------------------------------------------------------
At time t = 9 sec (Mode: Rate)
-------------------------------------------------------------------------------
Ing. Matches: 0
===============================================================================
A:ALA-1>monitor>filter#
lag
Syntax lag lag-id [lag-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command monitors traffic statistics for Link Aggregation Group (LAG) ports. Statistical infor-
mation for the specified LAG ID(s) displays at the configured interval until the configured count is
reached.
The first screen displays the current statistics related to the specified LAG ID. The subsequent statis-
tical information listed for each interval is displayed as a delta to the previous display. When the key-
word rate is specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
7210 SAS M, T, X, R6 Basic System Configuration Guide
Root Commands
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Page 79